Professional metal structure for mounting photovoltaic panels on the ground (Ground Solar Plant) for 26 570W panels totaling 15KW (panel dimensions 2279x1134x35mm), organization on 1 row of 13 columns/row of 2 panels per column. Resistance in special weather conditions (maximum wind speed 140km/h, snow with maximum height 60cm). Panel inclination angle 30 degrees, free distance from the ground 60cm, foundation made with metal screws with 1.6m thread, resistant aluminum superstructure, includes all accessories. Does not include photovoltaic panels

Adjustable end clamp kit for attaching photovoltaic panels with a thickness of 30-40mm on the R04/R10 rail, consisting of an end clamp for each panel, a screw + profiled nut kit for attaching the R04/R10 rail clamp.

Middle clamp kit for attaching photovoltaic panels with a thickness of 30-40mm on the R04/R10 rail, consisting of a double clamp for fixing two panels, screw + profiled nut kit for attaching the R04/R10 rail clamp.

R09 aluminum rail with a length of 3.5m for mounting photovoltaic panels

R10 aluminum rail with a length of 3.5m for mounting photovoltaic panels

R10 aluminum rail with a length of 2.35m for mounting photovoltaic panels

silo kit 1x4 PV width 1.1m, calculated on its own R04 - 4600mm with triangle
Kit - for mounting silos, triangle uprights 30 degrees for, calculated for four photovoltaic panels * 1096mm wide, maximum wind speed 140km/h

R09 aluminum rail with a length of 2.35m for mounting photovoltaic panels

Cable clip (for 1-2 cables).

Cable clip (for 1-2 cables).

Cable clip (for 3-4 cables).

Rail Clamp Kit for triangle support
(each triangle bracket match two of this clamp)

Fixed triangular aluminum support 1620x1550mm, L-shaped aluminum profile section with dimensions 40x40x3mm.
It ensures an inclination angle of 30 degrees, for mounting on roofs or flat surfaces, so that the panels mounted on these supports are inclined at 30 degrees from the horizontal.

PV panel fixing bracket kit

PV panel fixing bracket kit

Adjustable fastening kit for the R04 rail on a tiled roof, consisting of 1 piece of profiled stainless steel console under the tile, 3 pieces of galvanized steel screws M6x80mm for fastening the console in the wooden structure of the roof, screw + nut for fastening the console to the rail.

Adjustable fastening kit for the R04 rail on a tiled roof, consisting of 1 piece of profiled stainless steel console under the tile, 3 pieces of galvanized steel screws M6x80mm for fastening the console in the wooden structure of the roof, screw + nut for fastening the console to the rail.

Adjustable fastening kit for the R04 rail on a tiled roof, consisting of 1 piece of profiled stainless steel console under the tile, 3 pieces of galvanized steel screws M6x80mm for fastening the console in the wooden structure of the roof, screw + nut for fastening the console to the rail.

Rail fastening kit R04 on a tiled roof, consisting of 1 piece of profiled stainless steel console under the tile, 3 pieces of galvanized steel screws M6x80mm for fastening the console in the wooden structure of the roof, screw + nut for fastening the console to the rail.

Roof rail attachment kit consisting of an L-shaped bracket and bracket fixing screw M10x 300mm

R04 rail anchoring/fastening kit on a tin roof, consisting of an L-shaped console with a height of 125mm, a 6.3x80mm stainless steel self-drilling screw for attaching the L-console to the roof, a rubber pad to be placed between the sole of the L-console and the roof, kit screw+nut for attaching the L bracket to the rail.

Kit for attaching clamps to the rail consisting of screw + profiled nut for the rail.

Adjustable end clamp kit for attaching photovoltaic panels with a thickness of 35-50mm on the R04 rail, consisting of an adjustable end clamp for fixing the panel, a screw + profiled nut kit for attaching the R04 rail clamp.

End clamp kit for attaching photovoltaic panels with a thickness of 35mm on the R04 rail, consisting of an end clamp for fixing the panel, screw + nut kit for attaching the R04 rail clamp.

Middle clamp kit for attaching photovoltaic panels with a thickness of 35mm on the R04 rail, consisting of a double clamp for fixing two panels, screw + profiled nut kit for attaching the R04 rail clamp.

Aluminum rail extension kit R04, length 150mm, for fixing the second rail in the extension

Rail Splice Kit #3  for R04 Rail

R04 aluminum rail with a length of 2.35m for mounting photovoltaic panels

R04 aluminum rail with a length of 3500mm for mounting photovoltaic panels, 0.60Kg/m'; 50mm height*26.3mm width*1.5mm thickness. The rail profile is compatible with the stainless steel upright components from the Mondo Style Photovoltaic catalog
Technical specs:
1. The material of the parts is AL6005-T5, and the chemical composition
meet the national standards;
2. Surface treatment: use flat anodic
oxidation, the average film thickness is not less
than 12 microns, and the film thickness at any point is not less than
10 microns;
3. Unfilled wall thickness: 1.5 (-0.15 to +0) , the unmarked rounded corners
are all R0.5;
5. Profile cutting length tolerance: -0 to +5 mm;
6. No scratches or severe scratches on the unprocessed surface, and the
processed surface is required to have a flat cut surface without burrs and
sharp edges;
7.Hardness requirements: above 14 ° (HW);
8. The outer surface is a decorative surface.