|
MPEG-2 EncoderWellav - UMH-230MPEG-2 encoder, for 19" rack, 2xAV in, 3xASI out, 2xSDI in, IP output |
Ask for offer *) VAT not included Availability : On demand |
UMH230 MPEG-2 SD Encoder
The UMH230 is Wellav’s new real-time 2-channel MPEG-2 SD encoder, It can support simultaneous MPEG-2 encoding of two programs in real time with independent ASI outputs or in one multiplexed output. It also support composite input. With easy network management tool and affordable prices, this model is ideal for MPEG-2 encoding for both content distribution and redistribution.
Features:
- Two-channel 4:2:0 MPEG-2 SD encoding 1.5 Mbps to 15 Mbps DVB compliant
- MPEG-1 layer II audio encoding
- Four audio channels are analog input
- 4) YCbCr, CVBS input
- Three independent ASI outputs including one multiplexed ASI output
- Support MPEG-2 frame/field motion estimation and DCT
- Support editing of program/service provider name and PID setting
- TS stream PCR synchronization
- Managed via front panel or network management software (SNMP support)
Specifications:
Video Input |
|
Input Interfaces |
CVBS x 2, YCbCr x 2 |
System |
NTSC and PAL |
Input resolution: |
576_50i, 4801_60i |
Multiplexing output support for IP (optional) |
|
Connector Type |
75Ω, BNC |
Aspect ratio |
4:3, 16:9 |
|
|
Video Output |
|
3 independent ASI output |
|
Connector Type |
75Ω, BNC |
ASI bit rate |
270Mbit/s + 100ppm |
Support burst mode and continuous mode |
|
Indendent and multiplexing output selectable |
|
Output level |
800mVpp±10% |
Max output bit rate |
72Mbps |
TS packet length |
188 / 204 bytes |
|
|
TSIP output |
|
Number of outputs |
1 |
Output type |
RJ45 |
Ethemet type |
1000 Base-T |
Encapsulation |
MPEG-2 TS over UDP/RTP |
Broadcasting type |
unicast, multicast |
TS Bit Rate |
follows the ASI output rate |
Multicast control protocol |
IGMP |
TS packet length |
188 / 204 bytes |
|
|
Video Encoding |
|
Encoding technique |
MPEG-2 MP@ML |
Chroma format |
4:2:0 |
GOP configurable |
I, IP, IPB, IPBB |
GOP size |
6 - 96 |
Video bit rate |
1.5~15Mbps |
Modes |
CBR & VBR |
|
|
Audio Input |
|
Number of input channel |
4 (Analog R/L x 2) |
Embedded audio format |
SMPTE 272M |
|
|
Audio Encoding |
|
Encoding technique |
MPEG-1 Layer2 |
Sampling frequency |
32KHz, 44.1KHz,48KHz |
Number of channel |
Up to 2 stereo pairs |
Audio mode |
Stereo, Joint Stereo, Dual Channel, Mono |
Audio Bit rate |
32~384Kbps |
|
|
Monitor and Control |
|
Management interface |
Ethemet 10/100 Base-T |
Connector type |
RJ45 |
Protocol |
SNMP |
Front panel |
LCD display with control keys |
|
|
Environmental |
|
Operation temperature |
0℃~+50℃ |
Size |
1RU rack mount chassis |
Dimension (HxWxD) |
44mmx484mmx306mm |
Net Weight |
approx 5Kg |
|
|
Power Requirements |
|
AC Power |
|
Voltage range |
90V ~ 250V |
Line frequency |
50~60Hz, x x A |
Consumption |
< 50W fully equipped |