| Overview: |
|---|
|
High Power Outdoor Wireless Coverage
PLANET Technology introduces the latest high power outdoor wireless LAN solution - the 300Mbps outdoor wireless AP, WNAP-7350. It provides higher transmit power, better performance, widely coverage and stable connection than standard outdoor wireless AP. As an IEEE 802.11a/n compliant wireless device, the WNAP-7350 is able to give stable and efficient wireless performance for long distance application; while designed with IEEE 802.11n standard and 2T2R MIMO technology makes it possible to deliver six times faster data rate up to 300Mbps than normal 802.11a wireless device. It also features adjustable output power up to 500mW to extend higher coverage in outdoor long range application.
 Multiple Operating & Wireless Modes
The WNAP-7350 supports multiple wireless communication connectivity (AP / Client CPE / WDS PtP / WDS PtMP / Repeater) allowing for various application requirements and thus it gives users more comprehensive experience when using the WNAP-7350. It helps users to easily build a wireless network and extend the wireless range of existing wireless network.
The WNAP-7350 also supports WISP mode, so CPE users could easily connect to Internet via WISP provider or connect to a wired network.
Advanced Security and Management
In aspect of security, besides 64/128- bit WEP encryption, the WNAP-7350 integrates WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x authority to secure and protect your wireless LAN. The wireless MAC filtering and SSID broadcast control consolidate the wireless network security and prevent unauthorized wireless connection. To fulfill enterprise and various applications demand, the WNAP-7350 enhances security and management features such as providing multiple SSID support.
Perfect Solution for Outdoor Environment
The WNAP-7350 is perfectly suitable in outdoor environments and exposed locations. By designing with IP67 and aluminum rugged strong housing, the WNAP-7350 can perform normally under rigorous weather conditions including heavy rain, wind and snow. Moreover, the WNAP-7350 is rated to operate at the temperature from -30 to 75 Degree C; thus it can operate more stably than general outdoor equipments. It is the best way using the WNAP-7350 to build outdoor wireless access applications between buildings on campuses, business, rural areas and etc.
Flexible Deployment with PoE Feature
Compliant with IEEE 802.3af/at Power over Ethernet standard, the WNAP-7350 can be powered by PSE (Power Sourcing Equipment) via a single UTP cable. It thus reduces the needs of extra cables and dedicated electrical outlets on the wall, ceiling or any other places where are difficult to reach. Furthermore, the WNAP-7350 is also suitable to be integrated with Solar Power PoE System to offer farther Wireless service in remote areas. It enables the wireless LAN deployment becomes more flexible and worries free from the power outlet locations.
 Easy Installation & Management
With user-friendly Web UI and step by step Setup Wizard, the WNAP-7350 is easier to install, even for users who never experience setting up a wireless network. Furthermore, with SNMP-Based management interface, the WNAP-7350 is convenient to be managed and configured remotely. |
| Application: |
|---|
Longer distance coverage between LAN connections
The WNAP-7350 is a cost-effective outdoor wireless solution for widely open space applications. It is ideal for outdoor wireless connections between buildings.
With built-in two N-Type Antenna connectors, the WNAP-7350 brings higher coverage and longer distance of wireless connection. The WNAP-7350 provides high output power with multiple adjust Tx controller, which allows CPE users to easily install and adjust the suitable value in appropriate locations. The WISP mode supported in the WNAP-7350 also enables CPE users to connect to Internet via local WISP provider conveniently.
**Sincerely suggest matching the same model in outdoor wireless bridge application for getting best performance. |
| Key Features: |
|---|
|
Industrial Compliant Wireless LAN & LAN
•Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps data rate
•Backward compatible with 802.11a standard
•Equipped with 10/100Mbps RJ-45 Ports for LAN & WAN, Auto MDI/ MDI-X supported
Fixed-network Broadband Router
•Supported connection types: Dynamic IP / Static IP / PPPoE / PPTP / L2TP / IPSec
•Supports Virtual Server, DMZ for various networking applications
•Supports DHCP Server, UPnP, Dynamic DNS
RF Interface Characteristics
•Built-in two N-Type Female Antenna connectors
•High Output Power up to 500mW with multiple adjustable transmit power control
Outdoor Environmental Characteristics
•Aluminum Housing, IP67 Protection Grade
•IEEE 802.3af/at Power over Ethernet design
•Operating Temperature: -30~75 Degree C
Multiple Operation & Wireless Mode
•Multiple Operation Modes: Bridge, Gateway, WISP
•Multiple Wireless Modes: AP, Client CPE (WISP), WDS PtP, WDS PtMP, Repeater
•Supports Dual-SSID allowing users to access different networks through one single AP
•Supports WMM (Wi-Fi Multimedia)
Secure Network Connection
•Supports Software Wi-Fi Protected Setup (WPS)
•Advanced security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK (TKIP/AES),
and 802.1x Authentication
•Supports NAT firewall features, with SPI function to protect against DoS attacks
•Supports IP / Protocol-based access control and MAC Filtering
Easy Installation & Management
•Web-Based UI and Quick Setup Wizard for easy configuration
•Remote Management allows configuration from a remote site
•SNMP-Based management interface
•System status monitoring includes DHCP Client, System Log
|
| Specification: |
|---|
- Hardware Specification
- Standard support:
- IEEE 802.11a/n Wireless LAN
- IEEE 802.11i Wireless Security
- IEEE 802.3 10Base-T Ethernet
- IEEE 802.3u 100Base-TX Ethernet
- IEEE 802.3x Flow Control
- IEEE 802.3af/at Power over Ethernet / PD
- Memory:
- 32 Mbytes DDR SDRAM
- 8 Mbytes Flash
- Interface:
- Wireless IEEE 802.11a/n, 2T2R
- LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX, IEEE 802.3af/at PoE/PD port
- WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
- Wireless RF Specification
- Wireless Technology:
- IEEE 802.11a
- IEEE 802.11n
- Data Rate:
- IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
- IEEE 802.11n (20MHz): up to 150Mbps
- IEEE 802.11n (40MHz): up to 300Mbp
- Media Access Control: CSMA / CA
- Modulation:
- Transmission / Emission Type: OFDM
- Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
- Frequency Band: 5.180GHz ~ 5.825GHz
- Operating Channel:
| 5.180GHz |
CH36 |
5.580GHz |
CH116 |
| 5.200GHz |
CH40 |
5.600GHz |
CH120 |
| 5.220GHz |
CH44 |
5.620GHz |
CH124 |
| 5.240GHz |
CH48 |
5.640GHz |
CH128 |
| 5.260GHz |
CH52 |
5.660GHz |
CH132 |
| 5.280GHz |
CH56 |
5.680GHz |
CH136 |
| 5.300GHz |
CH60 |
5.700GHz |
CH140 |
| 5.320GHz |
CH64 |
5.745GHz |
CH149 |
| 5.500GHz |
CH100 |
5.765GHz |
CH153 |
| 5.520GHz |
CH104 |
5.785GHz |
CH157 |
| 5.540GHz |
CH108 |
5.805GHz |
CH161 |
| 5.560GHz |
CH112 |
5.825GHz |
CH165 |
*The above 24 channels are defined in theory. The actual application will vary depends on the regulation in different regions and countries.
- RF Output Power:
- IEEE 802.11a: 27 ± 1dBm
- IEEE 802.11n: 24 ± 1dBm
- Receiver Sensitivity:
- IEEE 802.11a: -91dBm
- IEEE 802.11n: -92dBm
- Output Power Control: 3~27dBm
- Software Features
- LAN:
- Built-in DHCP server supporting static IP address distributing
- Supports 802.1d STP (Spanning Tree)
- WAN:
- Static IP
- Dynamic IP
- PPPoE
- PPTP
- L2TP
- IPSec
- Operating Mode:
- Firewall:
- NAT firewall with SPI (Stateful Packet Inspection)
- Built-in NAT server supporting Virtual Server and DMZ
- Built-in firewall with Port / IP address / MAC / URL filtering
- Wireless Mode:
- AP
- Client
- WDS PTP
- WDS PTMP
- WDS Repeater (AP+WDS)
- Channel Width: 20MHz / 40MHz
- Wireless Isolation: Enable it to isolate each connected wireless clients from communicating with each other mutually.
- Encryption Type: 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
- Wireless Security:
- Provides wireless LAN ACL (Access Control List) filtering
- Wireless MAC address filtering
- Supports WPS (WIFI Protected Setup )
- Enable / Disable SSID Broadcast
- Multiple SSID: Up to 2
- Max. Wireless Client: 40
- Max. WDS AP: 8
- Max. Wired Client: 60
- WMM: Supports Wi-Fi Multimedia
- QoS: Supports Quality of Service for bandwidth control
- NTP: Network Time Management
- Management: Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP
- Diagnostic tool: System Log, Ping Watchdog
- Mechanical & Power
- IP Rate: IP67
- Material: Aluminum
- Dimension (W x D x H): 320 x 27.5 x 320 mm
- Weight: 2.4kg
- Installation: Pole mounting or Wall mounting
- Power Requirements:
- AP: IEEE 802.3af/at PoE / 48V DC input (PoE Injector included)
- PoE Injector: 100~240VAC
- Power Consumption: 7.68W
- Environment & Certification
- Operation Temperature: -30~75°C
- Operating Humidity: 10~95% non-condensing
- Regulatory: CE / RoHS
- Accessory
- Standard Accessories:
- 48VDC 802.3af PoE injector & Power cord x 1
- Mounting Kit x 1
- Waterproof RJ-45 Connector Kit x 2
- Quick Installation Guide x 1
- CD (User’s Manual, Quick Installation Guide) x 1
|
|
