Hardware | |
Interface |
4×10/100Mbps POE ports(Data/Power)autodetection 2×10/100Mbps non-POE ports(Data/Power) |
Basic function
|
Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
Store-and-forward switching schemeSupport IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging |
Standards
|
IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast EthernetIEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control |
Mode
|
WLAN extend on/off |
Data Transfer Rate
|
Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex) |
Store & Forwarding
|
Yes |
Switching Capacity
|
1.2G |
MAC Address
Table Size
|
2K |
Jumbo Frame
|
2048 byte
|
Environment
|
Operation Temperature:0℃~40℃
Storage Temperature:-40℃~70℃
Operation Humidity:10%~90% RH Non-condensing
Storage Humidity:5%~90% RH Non-condensing
|
Power Input POE
Standards
|
Single port maximum power 30W,
Whole switch maximum power 65W Support over-current,over-voltage and short-circuit protection, Support Soft Start of High Power PD; Power Supply Pin:12+/36-
AC 110~240V 50/60HZ
|
Cabling type
|
100Base-TX: Cat 5e or better UTP/STP(≤100m)
10Base-TX: Cat 5e or better UTP/STP(≤250m)
|
Dimensions
(L x W x H )
|
124mm*115mm*33mm
|