Hardware Specifications | |
---|---|
Network Connector | 5 10/100/1000BASE-T RJ45 auto MDI/MDIX ports |
PoE Inject Port | 2 ports with 802.3bt PoE++ injector function (Ports 1 to 2) 2 ports with 802.3af/at PoE+ injector function (Ports 3 to 4) |
LED Indicators | System: PWR (Orange) Per PoE port: PoE (Orange, Ports 1 to 4) Ethernet port: LNK (Green) |
Thermal Fan | Fanless design |
Switch Architecture | Store-and-Forward |
MAC Address Table | 2K MAC address table with auto learning function |
Switch Fabric | 10Gbps |
Switch Throughput | 7.44Mpps @64 bytes |
Jumbo Packet | 9K bytes |
Flow Control | Back pressure for half duplex. IEEE 802.3x pause frame for full duplex |
Power Requirements | 55V DC, 2.8A |
Surge Protection | Contact: 4KV; Air: 6KV |
ESD Protection | Contact: 4KV; Air: 6KV |
Power Consumption | Max. 136 watts, 464.05 BTU |
Dimensions (W x D x H) | 168 x 93 x 32 mm |
Weight | 414g |
Power over Ethernet | |
PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE IEEE 802.3bt Power over Ethernet Plus Plus/PSE |
PoE Power Supply Type | Ports 1 to 2: End-span + Mid-span; Ports 3 to 4: End-span |
Power Pin Assignment | Port 1-2: 4 pairs 1/2 (-), 3/6 (+) and 4/5 (+), 7/8 (-) Port 3-4: 2 pairs 1/2 (-), 3/6 (+) |
PoE Power Output | Port 1-2: 90W max.; Port 3-4: 30W max. |
Total PoE Power Budget | 120 watts |
Standard Conformance | |
EMI Safety | FCC Part 15 Class A, CE |
Standard Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T Gigabit 1000BASE-T IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet Plus Plus |
Environment | |
Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |