 |
Acces Point Wireless IP-COM IUAP-AC-M Gigabit Dual Band 802.11AC Indoor/Outdoor MU-MIMOIP-COM - IUAP-AC-MIAUP-AC-M este un acces point Gigabit dual-band de la IP-COM care ofera o viteza simultana de pana la 1167 Mbps. Echipat cu 2 antene omnidirectionale high-gain, acesta ofera o raza de acoperire de pana la 200 m. Acesta poate indeplini cerinte diferite prin conectarea antenelor cu specificatii diferite la conectorii standard RP-SMA. Alimentat de tehnologia MU-MIMO, un singur dispozitiv IUAP-AC-M poate comunica cu mai multi clienti wireless in acelasi timp, oferind un randament mai mare si o experienta mai buna. IAUP-AC-M permite clientilor care accepta fie banda de 2.4 GHz, fie 5 GHz sau ambele sa se conecteze la aceasta in acelasi timp, tripland cantitatea de clienti conectati pe traditionalul single-band AP.
Alte imagini:
   |
 Pret fara TVA: 272.55 LEI Pret cu TVA 21% : 329,78 LEI Disponibilitate : Indisponibil |
- Durable IP65 enclosure for outdoor Wi-Fi applications
- MU-MIMO technology for high throughput
- Concurrent dual-band data rate up to 1167 Mbps (2.4 GHz: 300 Mbps; 5 GHz: 867 Mbps)
- Detachable antennas and 2 RP-SMA connectors
- Coverage radius of 200 meters
IEEE 802.11ac Wave2 and MU-MIMO
Powered by MU-MIMO technology, a single iUAP-AC-M can communicate with multiple wireless clients at the same time, letting you enjoy higher throughput and better experience.
Dual-band for more connected clients
iUAP-AC-M allows clients that support either 2.4 GHz or 5 GHz band, or both to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.
High-gain omni-directional antennas
Equipped with two 5 dBi high-gain omni-directional antennas, iUAP-AC-M provides a maximum coverage radius of 200 meters. iUAP-AC-M can meet different requirements by connecting antennas of different specifications to the standard RP-SMA connectors.
Built-in RF for intelligent optimization
Featuring various anti-interference algorithms, the built-in RF enables iUAP-AC-M to evenly allocate bandwidth resources for multiple users, filter interference, and optimize data rate, offering you a guaranteed signal strength and reliable wireless experience.
VLAN tagging for SSID
iUAP-AC-M allows you to set multiple SSIDs and add VLAN tags for SSIDs, thus protecting your network.
Standard PoE sourcing and DC power supply for easy deployment
You can use an IEEE 802.3at-compliant PoE sourcing equipment, or a 24V DC power adapter to power on iUAP-AC-M.
| Model | iUAP-AC-M |
| Mounting | Pole Mounting and Wall Mounting |
| Dimensions | 194.7*83*42.1 mm |
| Hardware Specifications | |
|---|---|
| Frequency band | 2.4 GHz, 5 GHz |
| Wireless standards | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac |
| 2.4 GHz data rate | 1 - 300 Mbps |
| 5 GHz data rate | 6 - 867 Mbps |
| Ethernet port | 1*10/100/1000 Base-TX port |
| Button | 1*Reset |
| LED indicator | 1*SYS |
| Waterproof level | IP65 |
| Lightning protection | 6000 V |
| Max. power consumption | 11.5 W (Full-load) |
| Power supply standard | IEEE 802.3af/at & 24V, 0.5A Passive PoE |
| Antenna | 2*5dBi，RP-SMA Connector |
| 2.4 GHz Max. output power | 26 +/- 1.5 dBm |
| 5 GHz Max. output power | 26 +/-1.5 dBm |
| 802.11b RX sensitivity | -93 dBm |
| 2.4 GHz 802.11n (MCS7) RX sensitivity | -72 dBm |
| 5 GHz 802.11a RX sensitivity | -93 dBm |
| 5 GHz 802.11n (MCS7) RX sensitivity | -74 dBm |
| Software Specifications | |
| Operating modes | AP, Client+AP |
| Hide SSID | Supported |
| Max. No. of SSID | 2.4 GHz: 8 5 GHz: 4 |
| Max. connected clients | 2.4 GHz: 128 5 GHz: 256 |
| WEP | Supported |
| WPA-PSK | AES/TKIP |
| WPA2-PSK | AES/TKIP |
| WPA | Supported |
| WPA2 | Supported |
| Access control | MAC address-based |
| Adjustable power transmit | Supported |
| Frequency analysis | Supported |
| AP isolation | Supported |
| Connected client control | Supported |
| RSSI threshold | Supported |
| WMM | Supported |
| VLAN tagging for SSID | Supported |
| Transmission power | Adjustable by 1 dBm |
| LED indicator control | Supported |
| Diagnostics tool | Ping, Traceroute |
| Scheduled reboot | Supported |
| Reboot at specified interval | Supported |
| Management | Web UI |
| System logs | Supported |
| Firmware upgrade | Local and AC upgrade |
| Reboot | Local and AC reboot |
| Reset | Local and AC reset |
| Backup configuration | Supported |
| Restore configuration | Supported |
| Operating Environment | |
| Default login IP address | 192.168.0.254 |
| Default user name | admin |
| Default password | admin |
| Operating temperature | -10℃ - 45℃ |
| Operating humidity | (10% - 90%) RH, non-condensing |
| Storage temperature | -30℃ - 70℃ |
| Storage humidity | (10% - 90%) RH, non-condensing |