8FE PoE+2GE Uplink PoE Switch,Attached Safety Lock

Stonet - ST110GHPDI-2G-130

Attached safety lock, more stable.
8* 10/100M PoE ports+2* 10/100/1000M uplink ports.
Internal 130W power supply with up to 30W PoE output per port.
Durable steel housing for better heat dissipation.
Support IEEE 802.3af/at standards, compatible with powered devices (PD) that meet IEEE 802.3af/at.
All ports support auto MDI/MDI-X function.
Equipped with a convenient DIP switch that can be easily switched between Normal mode, Extension mode, and Ai Watchdog mode.

Alte imagini:

Pret fara TVA:
157.85 LEI
Pret cu TVA 21% :
191,00 LEI
Disponibilitate :
In stoc

LED Indicators

Power Indicator	On	The switch is powered on.
	Off	The switch is powered off.
POE / Uplink Indicator (Link/ACT)	On	The corresponding port is connected to a network device but no activity
	Flashing	Data is transmitting through the corresponding port.
	Off	No device is connected to the corresponding port.

Hardware

Button	1* Dip Switch
Ports	8100Mbps POE ports 21000Mbps uplink ports
Backplane Bandwidth	5.6 Gbps
MAC Address Table	4K
Maximum POE Output Power	120W
Network Media & Transmission Distance	1000BASE-T: UTP category 5, 5e, 6 or above cable (≤ 100m) 100Base-TX: UTP category 5, 5e, 6 Category 5 (Cat5) or higher UTP/STP cables (≤100m) 10Base-TX: UTP category Category 6 (Cat6) or higher UTP/STP cables (≤250m) Tips：The actual transmission distance is related to the connected terminal/network cable type and condition; it is recommended to use Category 6 cable preferentially.

Software

Basic Functions	Complies with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards Compatible with IEEE 802.3af/at compliant powered devices (PD) Compatible with certified non-standard powered devices (PD) Supports store-and-forward switching Supports full power output Supports automatic MAC address learning and aging Extended cable transmission,supports long-distance monitoring power supply Supports IEEE 802.3X full-duplex flow control and Backpressure half-duplex flow control
Ethernet Protocols and Standards	IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control
Data Transfer Rate	POE port :10/100M full-duplex/ half-duplex modes Uplink port : 10/100M full-duplex/ half-duplex modes 1000M full-duplex mode
Environmental Requirements
Temperature	Operating Temperature:0℃ ~ 40℃(32 °F ~104°F) Storage Temperature:-40℃ ~ 70℃(-40 °F ~158°F)
Humidity	Operating Humidity:10% ~ 90% RH(non-condensing) Storage Humidity:5% ~ 90% RH(non-condensing)

Environmental Requirements

Temperature	Operating Temperature:0℃ ~ 40℃ Storage Temperature:-40℃ ~ 70℃
Humidity	Operating Humidity:10% ~ 90% RH(non-condensing) Storage Humidity:5% ~ 90% RH(non-condensing)
Altitude	Operating: Max 6500 feet (2000 meters) Storage: Max 6500 feet (2000 meters)

Lightning Surge Protection

Differential Mode	2KV
Common Mode	4KV

Physical Dimensions

Dimensions

(W x D x H)

186mm*150mm*43mm(7.32*5.91*1.69 in)

Others

Stacking Limit	Maximum of 4 layers when fully packaged
Humidity	5%～90% RH(non-condensing)
Storage Temperature	-40℃ ~ 70℃(-40°F ~158°F),with the most suitable storage condition being room temperature considering humidity
Storage Precautions	Store in a clean,ventilated environment free from corrosive gases,flammable,explosive,and other hazardous chemicals.Keep away from heat sources and sources of strong mechanical vibration
Storage Period	Under the above conditions,the product can be stored for one year.It is recommended to re-inspect and test the product after two years before use