PLANET IGTP-80xT Industrial Gigabit Media Converter series combines Ethernet media conversion (from 1000Base-X to 10/100/1000Base-T) with 802.3at High Power over Ethernet (PoE) injector delivered in an IP30 rugged strong case. Particularly designed for network equipment requiring sufficient and reliable power input, the IGTP-80xT series supports up to 30 watts of power output and data transmission both delivered to remote powered devices over a single Ethernet cable. Its 1000Base-X fiber optic uplink port provides long distance, high speed and stable data transmission to remote core network. The special and convenient power system of the IGTP-80xT series supports 24/48V DC power inputs for power redundancy and operational flexibility. Being able to operate under the temperature ranging from -40 to 75 degrees C, the IGTP-80xT series can be placed in almost any difficult environment.

Fiber-Optic Link Capability Extends the Range of Network Deployment
The maximum distance between the PoE PSE (Power Sourcing Equipment) and PD (Powered Device) via Ethernet cable is 100 meters. To extend the PoE deployment range, the IGTP-80xT series is integrated with fiber interface for farther distance applications. The IGTP-80xT series and its respective fiber connecting type include:
　　■ IGTP-802T: SC type multi-mode Fiber Interface, transmission distance up to 220m and 550m
　　■ IGTP-802TS: SC type single mode fiber interface, transmission distance up to 10km
　　■ IGTP-805AT: SFP slot supporting 100Base-FX / 1000Base-X Multi / Single Mode SFP module, transmission distance up to 120km (Varying on SFP module)

Physical Port
• 1-port 10/100/1000Mbps RJ-45 interface, auto-negotiation and auto MDI / MDI-X
　–1-port Data + Power output, 802.3af / 802.3at PoE standard compatible
　–10/100/1000Base-T: 1-Port Cat. 5/5e/6 UTP cable, up to 100 meters
• 1-port Gigabit Fiber Interface
　–IGTP-802T: SC Fiber Interface
　–IGTP-802TS: SC Fiber Interface
　–IGTP-805AT: LC Fiber Interface (Varying on SFP Module, 100/1000 dual mode support)

Hardware
• LED Indicators
　–System: Power 1, Power 2 and Fault LED 
　–Fiber port: LNK / ACT
　–10/100/1000Base-T port: LNK / ACT, PoE In-use
• DIP switch: LFP (Link Fault Pass-through) mode selection

IEEE 802.3af / 802.3at PoE
• Complies with IEEE 802.3af and IEEE 802.3at standard, End-Span PSE
• 24V / 48V DC Power Input for PoE
• Provides DC 52V power over RJ-45 Ethernet cable to devices with Ethernet port
• Supports PoE Power up to 30 watts for PoE port
• Auto-detects PoE IEEE 802.3at / IEEE 802.3af equipment, protecting the devices from being damaged by incorrect installation
• Remote power feeding up to 100m
• IEEE 802.3at / IEEE 802.3af splitter devices compatible

Industrial Case / Installation
• IP30 aluminum metal case protection
• DIN rail and wall mount design
• 24 and 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for master and slave power
• Supports EFT protection 6000V DC for power line 
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature.