Exchange rates

25-May-2012

1 EURO = 4.4662 RON  
1 USD = 3.5538 RON  


 » Fiber optic welding devices


Fujikura FSM-50S optical fiber splicer

Fujikura - FSM-50S

Optical fiber splicer

FSM-50S optical fiber splicer + cleaver

Price: 9.600,00 EURO
*) VAT not included
Availability : Call

Fujikura FSM-50S - OPTICAL FIBER FUSION SPLICER
Features:
 • Core to Core fiber alignment system (PAS)
 • 9 sec. splice time & 35 sec. tube-heat time
 • Dual-Directional Operating System
 • Arc Calibration-free system
 • Large Capacity slot-in battery
 
A number of improvements have been added to the performance-proven Profile Alignment System (PAS) platform, resulting in the smallest and lightest package of its kind. With improved splice & tube-heat time, the splicing operation is the world's fastest truly optimized for field use. Other valuable features include an ergonomic design, reduced numbers of operating steps and a powerful battery extend the boundaries of traditional field fusion splicing performance. The movable monitor and dual-direction operating system essentially gives the operator a choice of two splicers. With these features, the FSM-50S is now more than a tool, it is a work of art.
 
Specifications:
Applicable fibers SM (ITU-T G.652), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655)
Fiber Count Single
Cladding diameter 80 to 150µm
Coating diameter 100 to 1000µm
Fiber cleaved length 8 to 16mm with coating diameter of 250µm or less. 16mm with coating diameter of 250 to 1000µm. Optional set-plate for 8 to 16mm with coating diameter of 250 to 1000µm is available.
Actual average splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time Typical 9sec. with standard SM fiber.
Return loss >>60dB
Splicing modes 40 user programmable modes and up to 60 modes for reference(factory predetermined setting.
Splice loss estimate Available
Attenuation splice function Intentional high splice loss of 0.1dB to 15dB(0.1dB step) can be made for an in-line fixed attenuator.
Storage of splice result The last 2000 results to be stored in the internal memory.
Fiber display X / Y, or both X and Y simultaneously.
Magnification 295x for single X or Y view, or 147x for X and Y view.
Viewing method Two CMOS cameras and 5.6 inch color LCD monitor.
Operating condition 0 to 5000m above sea level, 0 to 95%RH and -10 to 50°C respectively.
Mechanical proof test 2N(standard)/ 4.4N(option)
Tube heater Built - in tube heater with 10 heating modes and up to 20 modes for reference.
Tube heat time Typical 35sec. with FP-03 protection sleeve.
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves.
No.of splice/heating with battery Typical 80 cycles with BTR-06(S)/ Typical 160 cycles with BTR-06(L).
Power supply Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-11. 13.2Vd.c. with BTR-06(S / L).
Terminals USB 1.1(USB-B type) for PC communication. Video terminal RCA video jack / NTSC.
Wind protection Max. wind velocity of 15m/s.
Dimensions 150W x 150D x 150H (mm)
Weight 2.3kg(2.8kg including AC adapter ADC-11)
* Specificatiile pot fi schimbate fara preaviz