Exchange rates

09-Jul-2020

1 EURO = 4.8406 RON  
1 USD = 4.2942 RON  


ANPC

 » CATV trunk, line, distribution amplifiers



nextraCOM LHX-M5134A 550MHz line amplifier

550 MHz line amplifier

nextraCOM - LHX-M5134A

550 MHz line amplifier, 2x 32dB outputs, Motorola hybrid, nominal input/output level 72/104dB, tilt 9-24dB (adjustable 9dB+15dB), attenuation 0-15dB, no return path, 220VA/14W

Price:
32.89 EURO

*) VAT not included
Availability :
Call

nextraCOM LHX-M5134A/B - Line Amplifier
   It is suitable for use in multi-class trunk signal transmission to compensate or strict distributing network. Adopt Motorola, Philips power double amplifier module. Its main indexes are all better than 34dB gain module obviously. Pre-class adopted low-noise microwave tube double-class push-pull amplifier insures enough gain. 1 input and 2 outputs have over-current protection (fuse plug-change). Branches or distributers at output can be plug-changed freely. Adopt fore-and-aft double equalizers to adjust flatness sensitive and convenient. Import double-layer PCB, a high reliable linearity power and a multi-strict anti-thunder system are set. All these insure long-life and safe work
 
Specifications:
Frequency Range MHz 45~550
Rated Gain dB 2 out x 30dB (1 out x 34dB)
Flatness In Band dB ±0.5
Rated Input Level dBµV 72
Rated Output Level dBµV 102
Gain Adjustable Range dB 0~15
Slope Adjustable Range dB 0~24(9dB fixed + 15dB adjustable)
Temperature Compensation dB ±2,5 (±30°C)
Noise Figure dB ≤9
Composite Triplee Beat dB >62
Composite Second Order dB >60
Return Loss dB >16
General
Anti-thunder KV 5 (10/700µS)
Power Voltage (50HZ) V ~(30~60V) or ~220V ±10%
Consumption VA 14
Dimension mm 270x200x75
 
Cautions:
   • To insure long-distance transmission flatness and signal to noise ratio in low frequency band, please use fore-and-aft equalizers at the same time for a good effect. If there is a down-concave figure at about 80-200MHz, you may use aft-equalizer and pull out aft-equalizer switch (18).
   • Max gain is the gain when attenuator and equalizer is zero and output plug-in is branch main output.
   • If channel number or amplifiers continuous transmission class number is too many, in order to insure figure quality, decrease output level reasonably
   • Must use power source with over-current protection. If use magnetism saturation power source, please measure voltage of it with a pointer multimeter, otherwise will cause an error
   • Finishing installation, please examine whether the circuit is over-current. If you needn't the over-current circuit, pull out the fuse. If need, examine short circuit first with a multimeter.
   • Service: The product installed or maintained by professionals. Any technique consult, please contact MONDO PLAST.
   • BEFORE RUNNING, EARTHING FIRST!!!
   • INSTALL AMPLIFIER WITH INPUT AND OUTPUT CONNECTORS UP !! (HANGING DEVICES UP !!)- AS SHOWN IN PICTURES !
Amplifiers have at oposite side of hanging devices 2 small holes for eliminatig water and condense from the amplifier body. These 2 holes MUST BE UNDER the amplifier body.

Pane Drawing :
Amplificator linie 550MHz nextraCOM LHX-M5134A
Product Structure :
Amplificator linie 550MHz nextraCOM LHX-M5134A
a. Low voltage (~60/50Hz) power supply  (B style)
1- RF input
2- Input Test Port: -20 dB
3- Input over-current protection fuse 10A/250V
4- Adjustable attenuator (use when input level too high)
5- Adjustable equalizer
6- Pre-class amplifier module
7- Temperature compensate switch (arrow-head level: no temperature compensate, arrow-head apeak: temperature compensate, decrease 3dB of total gain)
8- Import amplifier module
9- Output splitter or distributer plug-in (optional)
10- Output 1
11- Output 1 Test Port: -30 dB
12- Output 2 ( splitter -4dB or TAP -10dB)
13- +24V power LED
14- Output over-current protection fuse 10A/250V (pull out if no need)
15- Power supply fuse 3.15A
16- Switching Regulated Power Supply
17- Over-current inductor
18- Fixed equalizer (9dB) switch, arrow-head level: no equalizer, arrow-head apeak: equalizer.

Amplificator linie 550MHz nextraCOM LHX-M5134A b. High voltage (~220V/50Hz) power supply (A style)
3- Input over-current protection fuse 2A
Others are same to B style (~60V).
 
* Specificatiile pot fi schimbate fara preaviz
We use cookies to improve your site experience, to analyze website traffic and audience. By continuing to browse our website, you acknowledge your acceptance of cookie usage under the Cookie Usage Policy, agree to the Personal Data Processing Policy, and have noted the Personal Information Processing Note. Accept