Exchange rates

09-Dec-2019

1 EURO = 4.7777 RON  
1 USD = 4.3149 RON  


ANPC

 » Planet



FT-80x

10/100Base-TX to 100Base-FX Bridge Media Converters

Planet - FT-806A20

10/100Base-TX to 100Base-FX Bridge Media Converters Single Fiber ( WDM technology_), 1310nm Tx, 1550nm Rx
premium quality

Price:
45.32 EURO

*) VAT not included
Availability :
Call

FT-80x Series 10/100Base-TX to 100Base-FX Bridge Media Converters

Overview

PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.

The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function

LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

Key Features

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
• Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
• One fiber-optic, 1310nm wavelength, connector type and distance vary with model
 - FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm
 - FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm
• Data Transfer Rate:
 - TP: 10/100Mbps
 - FX: 100Mbps
• Duplex mode support:
 - Full or half-duplex mode by auto-negotiation (TP)
 - Full or half-duplex mode by DIP switch (FX)
• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
• DIP switch: 2 DIP switches
 - Rear DIP switch: FX duplex mode selection
 - Side DIP switch: LFP (Link Fault Pass-through) mode selection

 

Product
Protocol IEEE 802.3, 10BASE-T
IEEE 802.3u, 100BASE-TX
IEEE 802.3u, 100BASE-FX
Dimensions (W x D x H) 97 x 69 x 26 mm
Weight 0.2kg
Power Input 5V DC, 2A, max.
Power Supply AC Adapter 100-240VAC Frequency: 50-60Hz
Enclosure Compact-sized metal housing
Case with anticorrosion treatment
Electrostatic paint
Connectors and Cables
Shielded Twisted-pair RJ45, Category 5 (EIA/TIA 568)
Fiber-optic FT-801 : ST / Multi-mode / 2km
FT-802 : SC / Multi-mode / 2km
FT-803: MTRJ / Multi-mode / 2km
FT-802S15 : SC / Single mode / 15km
FT-802S35 : SC / Single mode / 35km
FT-802S50 : SC / Single mode / 50km
FT-806A20: WDM SC / Single mode / 20km
FT-806B20: WDM SC / Single mode / 20km
FT-806A60: WDM SC / Single mode / 60km
FT-806B60: WDM SC / Single mode / 60km
Multi-mode Cable 50/125, 62.5/125 µm
Single-mode (SM) Cable 9/125 µm
Optic Wavelength FT-801: 1310nm
FT-802: 1310nm
FT-803: 1310nm
FT-802S15: 1310nm
FT-802S35: 1310nm
FT-802S50: 1310nm
FT-806A20: TX: 1310nm; RX: 1550nm
FT-806B20: TX: 1550nm; RX: 1310nm
FT-806A60: TX: 1310nm; RX: 1550nm
FT-806B60: TX: 1550nm; RX: 1310nm
Max. Launch Power (dBm) FT-801: -14
FT-802: -14
FT-803: -14
FT-802S15:0
FT-802S35:-8
FT-802S50:0
FT-806A20:-8
FT-806B20:-8
FT-806A60:0
FT-806B60:0
Min. Launch Power (dBm) FT-801: -20 (62.5/125µm), -23.5 (50/125µm)
FT-802: -20 (62.5/125µm), -23.5 (50/125µm)
FT-803: -20 (62.5/125µm), -23.5 (50/125µm)
FT-802S15: −20
FT-802S35: -15
FT-802S50:-5
FT-806A20:-14
FT-806B20:-14
FT-806A60:-5
FT-806B60:-5
Receive Sensitivity (dBm) FT-801: -31.8
FT-802: -31.8
FT-803: -31.8
FT-802S15: -32
FT-802S35:-34
FT-802S50: -35
FT-806A20:-31
FT-806B20:-31
FT-806A60:-34
FT-806B60:-34
Maximum Input Power (dBm) FT-801: -14
FT-802: -14
FT-803: -14
FT-802S15:0
FT-802S35:0
FT-802S50:0
FT-806A20:0
FT-806B20:0
FT-806A60:0
FT-806B60:0
Supported Distances and Functions
Shielded Twisted-pair 100m (328 ft.)
Multi-mode Fiber Optic 412m (1,350 ft.) (half-duplex)
2km (1.2 miles) (full-duplex)
Single-mode (SM) 412m (1,350 ft.) (half-duplex)
15km (9 miles) (full-duplex)
20km (12 miles) (full-duplex)
35km (21 miles) (full-duplex)
50km (31 miles) (full-duplex)
60km (37 miles) (full-duplex)
Port Mode TP: Half and full duplex, auto-negotiation
FX: Half and full duplex via DIP switch
Environment & Emissions
Operating Environment Temperature: 0~50 degrees C
Humidity: 5~90% non-condensing
Storage Environment Temperature: -40~70 degrees C
Humidity: 5~90% non-condensing
Emissions FCC Class A, CE Class A
Ordering Information
FT-801 10/100BASE-TX to 100BASE-FX (ST, MM) Bridge Media Converter -- 2km
FT-802 10/100BASE-TX to 100BASE-FX (SC, MM) Bridge Media Converter -- 2km
FT-802S15 10/100BASE-TX to 100BASE-FX (SC, SM) Bridge Media Converter -- 15km
FT-802S35 10/100BASE-TX to 100BASE-FX (SC, SM) Bridge Media Converter -- 35km
FT-802S50 10/100BASE-TX to 100BASE-FX (SC, SM) Bridge Media Converter -- 50km
FT-803 10/100BASE-TX to 100BASE-FX (MT-RJ, MM) Bridge Media Converter
FT-806A20 * 10/100BASE-TX to 100BASE-FX (WDM TX:1310nm, SM) Bridge Media Converter -- 20km
FT-806A60 * 10/100BASE-TX to 100BASE-FX (WDM TX:1310nm, SM) Bridge Media Converter -- 60km
FT-806B20 * 10/100BASE-TX to 100BASE-FX (WDM TX:1550nm, SM) Bridge Media Converter -- 20km
FT-806B60 * 10/100BASE-TX to 100BASE-FX (WDM TX:1550nm, SM) Bridge Media Converter -- 60km
Remarks * FT-806A20/806B20 and FT-806A60/806B60 should run in pair. It means you must connect FT-806A20 / FT-806A60 to one end while FT-806B20 / FT-806B60 to the other end.
We use cookies to improve your site experience, to analyze website traffic and audience. By continuing to browse our website, you acknowledge your acceptance of cookie usage under the Cookie Usage Policy, agree to the Personal Data Processing Policy, and have noted the Personal Information Processing Note. Accept