| Planet FGSW-2402VS - 24-port 10/100Mbps + 2-Gigabit slots Web Smart Ethernet Switch |
| |
| Description |
The PLANET FGSW-2402VS offers 24 10/100Mbps Fast Ethernet ports with 2 open slots (port25, 26). The two open slots can be installed by optionally two of 10/100Base-TX port, 1000Base-T port, 100Base-FX, or 1000Base-SX/LX fiber-optic interfaces. The distance can be extended from 100 meters (TP), 2 kilometers (Multi-mode, ST or SC), up to 15 kilometers (Single-mode, SC).
Equipped with non-blocking 8.8Gbps backplane greatly simplifies the tasks of upgrading your LAN to cater for increased bandwidth demands.
For efficient management, the FGSW-2402VS Web Smart Switch is equipped with console and Web interface. The FGSW-2402VS Web Smart Switch can be programmed for basic switch management functions such as port speed configuration, Port Trunking, VLAN, Port Mirroring, QoS, bandwidth control, and Misc Configuration.
The FGSW-2402VS provides port-based VLAN (including overlapping). The VLAN groups allowed on the FGSW-2402VS will be maximally up to 26 for port-based VLAN. Via supporting port trunking, the FGSW-2402VS allows the operation of a high-speed trunk combining multiple ports. The FGSW-2402VS provides seven groups of up to 4-ports for trunking, and it supports fail-over as well. |
|
| |
| Product Application |
| Workgroup Switch |
| |
| With 24 10/100Mbps ports and up to 2 optional copper or fiber ports, the FGSW-2402VS provide a cost-effective, high-performance solution for power users. |
|
| |
| Department Switch |
| |
| With its 8.8 Gigabits per second, non-blocking switch fabric, the FGSW-2402VS can easily provide a local, high bandwidth, Fast Ethernet network for your departmental backbone. With the two open slots, the FGSW-2402VS provides the uplink to the backbone network through either Fast Ethernet fiber-optic or Gigabit Ethernet SX/LX modules. |
|
| |
| MTU Switch |
| |
| In an MTU/MDU application, the advanced functionality of the FGSW-2402VS eliminates traditional problems associated with Ethernet. Using the built-in VLAN functionality can segregate users. This coupled with the flexible fiber module options makes the FGSW-2402VS one of the best and most cost-effective switch solutions for multi-tenant service providers. |
|
| |
|
| |
| Key Features |
| |
• Complies with the IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab Gigabit Ethernet standard
• 24-port 10/100 Mbps Fast Ethernet Switch
• 2 open slots for 10/100Base-TX, 1000Base-T and 100Base-FX, 1000Base-SX/LX fiber-optic interface with various connection media and distances
• Each Switching ports support auto-negotiation-10/20, 100/200Mbps supported
• Auto-MDI/MDI-X detection on each RJ-45 port
• Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full- duplex)
• High performance Store and Forward architecture,broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• 6K MAC address table, automatic source address learning and ageing
• 4Mbit embedded memory for packet buffers
• Console and Web interface for Switch basic management and setup
• Support up to 26 port-based VLAN groups
• Support up to 7 Trunk groups, each trunk for up to maximum 4 port with 800Mbps bandwidth
• Port mirroring allows monitoring of the traffic across any port in real time
• Support QoS and bandwidth control on each port |
| |
|
| |
| SPECIFICATIONS |
| |
| Hardware Specification |
| Ports |
24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports |
| Module Slot |
2 open slots for 10/100Base-TX, 1000Base-T and 100Base-FX, 1000Base-SX/LX fiber-optic interface |
| Switch Processing Scheme |
Store-and-forward |
| Address Table |
6K entries |
| Share data Buffer |
4Mbit |
| Throughput (packet per second) |
6.547Mpps |
| Switch fabric |
8.8Gbps |
| Flow Control |
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex |
| Dimensions |
440 x 200 x 44 mm, 1U height |
| Weight |
2.6 kg |
| Power Requirement |
100~240 VAC, 50-60 Hz |
| Power Consumption / Dissipation |
30 Watts maximum / 102 BTU/hr maximum |
| Temperature |
Operating: 0~50°C, Storage -40~70°C |
| Humidity Operating |
10% to 90%, Storage: 5% to 90% (Non-condensing) |
| Smart function |
| System Configuration |
Console port and Web interface |
| Port Configuration |
Port disable/enable Auto-negotiation disable/enable. 10/100Mbps full and half duplex mode selection Flow control disable/enable |
| Port Status |
Display each port's disable/enable status, each port's link status, and speed duplex mode. Flow control status |
| Port Trunking |
Support 7 groups of 4-port trunk support |
| VLAN |
Maximum up to 26 VLAN groups for port-based VLAN |
| Port Mirroring |
1 Mirroring port to monitor several mirrored ports. The monitor modes are Disable, RX, TX, TX& RX |
| QoS |
Allow to assign low and high priority on each port |
| Bandwidth Control |
Allow to assign rate control on each port |
| Standards Conformance |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Standards Compliance |
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3z(Gigabit Ethernet)
IEEE 802.3ab (Gigabit Ethernet)
IEEE 802.3x (Flow control)
IEEE 802.1p QoS |
|
| |
|
| * Specificatiile pot fi schimbate fara preaviz |
