Curs valutar

11-Feb-2012

1 EURO = 4.3529 RON  
1 USD = 3.2831 RON  


 » Aparate de sudura fibra optica


Splicer Fibra optica FURUKAWA FITEL S177A

FURUKAWA FITEL - S177A

Splicer Fibra optica

SPLICER fibra optica FURUKAWA FITEL S177A + cleaver

Pret: 9.400,00 EURO
*) Pretul nu contine TVA
Disponibilitate : Sunati

FITEL S177A - Core-Alignment OPTICAL FIBER FUSION SPLICER
Description:
The new hand-held FITEL S177A incorporates an improved heating design that cuts splice-to-heat time by 40 percent, achieving a 9-second splice time and 37-second heat time. The unit's T-shaped body design is also 40 percent lighter. Ideal for fast field use, the S177A reduces the fiber length required for splicing by 30 percent. In addition, fiber magnification power is 608x, marking the industry's most powerful rating for a core alignment splicer.
 
Features & Applications
  • Faster Splicing
    The SA177A has a lightening fast splice time of 9 seconds. Power up your production with the S177A!
  • Multiple Splicing Programs
    The S177A comes with 42 pre-installed splicing programs, providing optical component manufacturers with programs for specialty and dissimilar fiber splicing combinations (CS980, EDF, NZDSF, etc.)
  • Built-in Battery
    The S177A comes with an internal battery that automatically charges when the unit is plugged into AC Power - even when splicing.
  • Transreflective LCD
    The S177A comes equiped with a new transreflective LCD that allows for clear viewing of the splice even in direct sunlight.
  • Large Data Memory Capacity
    Data for up to 2000 splices can be stored in the unit. All data can also be exported to a PC through USB connection to the splicer.
  • Machine self-check
    The S177A is equiped with a self diagnostic feature that can automatically verify the function of all motors, sensors, and cameras.
  • Visual guidance for maintenance
    The S177A is so advanced that it even offers a visual step-by-step guidance for common maintenance procedures. Simply enter the maintenace menu and select the procedure you wish to perform and the unit will provide you step-by-step instructions with images.
  • Available Fibre Holder System
    The S707 series fiber holders are an option for the S177A to ease fiber preparation and transfer to the fusion splicer.
 
Specifications:
Splicing method Core-Alignment
Fiber Type SMF, MMF, DSF, NZDSF, EDF, TW, LF, HI1060, and many more
Cladding diameter 80 to 220µm
Coating diameter 100 to 1000µm
Average Loss SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB
Splice time 9 sec.
Heat time 37-seconds (40mm), 51-seconds(60mm)
Applicapble Sleeves 20-60mm
Cleave length 150-200mm: 5mm, 250mm: 5~16mm; 400/900mm: 10,16mm.
Magnification Up to 608x
Dimensions 130Wx260Dx137H (mm)
Power AC Input: 85 to 264VAC (50/60Hz)
DC Input: 11 to 17DVC
Battery: Li-ion
Battery Internal battery - 70 splice cycles
External battery (optional) - 350 splice cycles
Splice Memory 2000 splices
Op. Environment 0 - 4000m, -10 to +50°C and 90% at 38°C
Operating condition 0 to 5000m above sea level, 0 to 95%RH and -10 to 50°C respectively.
Mechanical proof test 2N(standard)/ 4.4N(option)
Tube heater Built - in tube heater with 10 heating modes and up to 20 modes for reference.
Tube heat time Typical 35sec. with FP-03 protection sleeve.
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves.
No.of splice/heating with battery Typical 80 cycles with BTR-06(S)/ Typical 160 cycles with BTR-06(L).
Power supply Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-11. 13.2Vd.c. with BTR-06(S / L).
Terminals USB 1.1(USB-B type) for PC communication. Video terminal RCA video jack / NTSC.
Wind protection Max. wind velocity of 15m/s.
Dimensions 150W x 150D x 150H (mm)
Weight 2.3kg(2.8kg including AC adapter ADC-11)
* Specificatiile pot fi schimbate fara preaviz