|
Osciloscop digitalAtten - ADS1042CMLOsciloscop digital de laborator, 40MHz, 1GS/s, afisaj colo LCD 7" |
Acest produs nu mai este disponibil! Disponibilitate : Sunati |
1.Introduction:
Feature:
1.500Msa/s & 1Gsa/s Sampling Rate
2.2 Channels
3.7’’Widescreen LCD Color Display
4.8x18 div time window
5.USB Host/Device:Support USB Printer and USB Flash Drive
6.PictBridge Software
7.12 Language
8.Screen saver function
Applications:
1.Industial Power Design,Troubleshooting,and Maintenance
2.Electronics Design,Troubleshooting,Installation,and Maintenance
3.Circuit Design & Debug
4.Educational Lab & Training Institutions
5.Repair & Service
6.Production Test & Quality Inspection
2.Specification:
Technical Characteristic:
1. The highest Single real-time sampling rate can up to 1Gsa/s;Equivalent sampling rate is up to 50Gsa/s
2. Memory Depth:CML Series:2Mpts,realized via special data recorder
3. Max recording length:6Mpts,realized via special data recorder
4. Trigger types:Edge,Pulse Width,Video,Slope,Alternative
5. Unique Digital Filter function and Waveform recorder function
6. No loss of bandwidth when using CH2 and long memory at the same time
7. Support Pass/Fail function
8. Thirty two parameters Auto measure function
9. Save/recall types:Setups.Waveforms,CSV file,Picture
10. Waveform Indensity and Grid Brightness can be adjusted
11. User Inerface in 12 Languages
12. Standard Configuration Port
USB Host:Support USB flash driver save/recall function and update firmware;
USB Device:Support PictBridge compatible printer and support PC remote control;RS232,Pass/Fail output.
Model |
1202CL+ |
1202CML |
1152CML |
1102CML |
1062CML |
1042CML |
1022CL+ |
Bandwidth |
200MHz |
150MHz |
100MHz |
60MHz |
40MHz |
25MHz |
|
Sampling Rate |
500Msa/s |
1Gsa/s |
500Msa/s |
||||
Equvalent |
50Gsa/s |
10Gsa/s |
|||||
Memory |
5Kpts/CH |
Single Channel:2Mpts;Double Channels:1Mpts |
40Kpts |
||||
Rise Time |
<1.8ns |
<2.3ns |
<3.5ns |
<5.8ns |
<8.8ns |
<14ns |
|
Input Impedance |
1M Ohm ||17Pf |
1M Ohm ||14Pf/50O |
1M Ohm ||17Pf |
||||
|
|
|
|
|
|||
Sec/div Range |
2.5ns/div-50s/div |
5ns/div-50s/div |
10ns/div-50s/div |
2.5ns/div-50s/div |
|||
Scan:100ms-50s/div |
|||||||
Display |
7’’LCD Color(480*234) |
Abundant Trigger Function
ADS1000 series products have rich trigger modes: Edge, Pulse,Video, Slope and Alternative mode, which satisfy with users more extensive needs.Alternative trigger mode is usually used to observing two non-correlated signals at the same time and users can select different trigger mode for two channels, which is a kind reproduction that analog oscilloscope function in the digital oscilloscope.
Digital Filter Function
ADS1000 series provide a digital filter function,and users can use it setting
upper limit and lower limit of frequency to reduce signal noise and filter error
signal. So they can observe their interested signals distinctly, which will
advance users' work efficiency consumedly.
Auto Measure Function
ADS1000 series can auto measure thirty two parameters, which is most in the same level digital oscilloscopes. Auto measure function can eliminate user error consumedly, and users will measure parameters what they need faster and more accurately using it.
ADS1000 series also have all measurement function that displays all the waveform parameters on the screen according to measure kinds, and users can ready measure parameters value expediently making ADS1000 series the most perfect measure tools
Pop-up Menu Display Mode
The menu may hide as necessary make waveforms display on18 divides full screen. Comparing with other same level digital oscilloscopes, this kind of pattern is more flexible, the user operation is more convenient and users can observe waveforms clearly.
Pass/Fail Function
Users may use the Pass/Fail function which the ADS1000 series provides to carry on the product test. Through a series of setups, the oscilloscope can output the test result automatically which enhanced the product production efficiency greatly.
Display
ADS1000 series products use the 7" Wide Screen Color TFT LCD. The screen display parameter value and the waveform are clearer, stably and nature; That is also more advantageous to alleviate tiredness of users using the instrument extended periods at a time.
Waveform Recorder Function
Using this function, Users can continue record data of their need signals as the form of frame. Waveform recorder can record input waveform from CH1 and CH2, with maximum record length of 1500 frames. This record behavior can also be activated by the pass/fail test output, which makes this function especially useful to captureabnormal signals in long term without keeping an eye watching it.
FFT Waveform Split Display Function
FFT waveform and its Channel waveform can display on split screen at the same time. In split display mode, the screen is divided into two parts and each part is divided eight divides in vertical direction. That is similar to under the entire screen pattern simultaneously to observe two waveforms. This way will make users observe waveforms to be clearer and convenient.
Powerful EasyScope3.0 Software
EasyScope3.0 software is the powerful system software suitable for ADS1000 series products. This software can be compatible RS-232 and USB Device to realize communication between the computer and the oscilloscope, then realizes long-distance control.Simultaneously this software can automatic real-time refresh waveform data, provide waveforms measure data samp-ling data, screen images read storage and printing functions. In addition EasyScope 3.0 also has setups upload and download function. Most quickly basing on millisecond level interactive between PC and ADS1000 series make users to be easier to analyze, research waveforms and data.
Cursor Survey Function
ADS1000 series cursor survey function has three kinds of modes: Auto manual mode, Track mode, Auto mode. The user may according to own need to choose the survey pattern nimbly, thus with ease read measure results from the top right of the screen or experience completely automatic intelligent design pattern.
Multi-country Language User Interface Display function
ADS1000 series product has 12 languages user interface display function: Simplified Chinese, Traditional Chinese, English, Arabic, French, German, Russian, Spanish, Portuguese, Japanese and Korean, which has further developed the ADS1000 series product international market and has laid the foundation for ADS1000 series making for the international market.
Input
Input Coupling:AC, DC, GND
Input Impedance:
DC: 1M?+/-2% || 17pF +/-3pF
AC: 1.2M?+/-2% || 17pF +/-3pF, <=100mV/div
1.0M?+/-2% || 17pF +/-3pF, >100mV/div
Maximum Input Voltage :±400V PK-PK CATI
Ch to Ch Isolation (Both channels in same V/div setting)
> 100: 1 at 100MHz (ADS1202CML), > 100: 1 at 70MHz (ADS1152CAL/CML)
> 100: 1 at 50MHz (ADS1102CAL/CML), > 100: 1 at 30MHz (ADS1062CAL/CML)
> 100: 1 at 20MHz (ADS1042CML)
Probe attenuator: 1X, 10X
Probe attenuator:1X, 10X, 100X, 1000X
Horizontal System
Real Time Sampling Rate:
Single Channel 1GSa/s; Double Channels 1GSa/s (ADS1202CML)
Single Channel 1GSa/s; Double Channels 500MSa/s (ADS1000CAL/CML Series)
Single Channel 500MSa/S; Double Channels 250MSa/s (ADS1022CL+ / ADS1202CL+)
Equivalent Sampling Rate :50GSa/s
Measure Display Modes:MAIN, WINDOW, WINDOW ZOOM, Scan, X-Y
Timebase Accuracy :±100ppm measured over 10ms interval
Time Window :18 Divisions
Horizontal Scan Range : ADS1202CML/CL+ ADS1152CAL/CML ADS1102CAL/CML ADS1062CAL/CML ADS1042CML ADS1022CL+
2.5ns/div -50s/div 5 ns/div - 50s/div 10 ns/div -50s/div 2.5ns/div -50s/div
Scan: 100ms/div -50s/div (1-2.5-5 sequence)