Curs valutar

23-May-2012

1 EURO = 4.4587 RON  
1 USD = 3.5272 RON  


 » Generatoare de semnal, generatoare de functii


Generator de functii Atten AT8603B

Atten - AT8603B

Generator de functii

Generator de functii, frecventa: 1Hz - 3MHz

Pret: 265,00 EURO
*) Pretul nu contine TVA
Disponibilitate : Sunati

Atten AT8603B Function Signal Generator
 
Specifications
1. WAVEFORM CHARACTERISTIC:
         sine-wave, TTL level square wave
         waveform amplitude resolution: 10bit
         sine wave harmonic distortion: -40dBc (frequency<1MHz), -30dBc (frequency≥1MHz)
         sine wave THD: <1% (high resistance, 1KHz)
         TTL level square wave rise time: ≤20ns
         Square wave overshoot: ≤5%
2. FREQUENCY CHARACTERISTIC:
         frequency range: 1Hz ~ 3MHz
         resolution: less than 1MHz: 0.01Hz ;1MHz and more than 1MHz: 0.1Hz
         frequency tolerance: ≤ ±(5x10-5+10mHz+1d)
         frequency stability: ≤±50ppm(-40°~+85°C) (use the low temperature drift crystal oscillator with PLL phase-lock circuit). Custom-made can be done if frequency stability requires to be ±20ppm or less.
3. AMPLITUDE CHARACTERISTIC:
         amplitude range: 10mVp-p ~ 16Vp-p (high resistance); 5mVp-p~ 8Vp-p (50Ω)
         display: 3 digits
         amplitude error: ≤ ±(5%+100 mVp-p)(high resistance, 1KHz, 1~16Vp-p)
         amplitude stability: ≤±5% (1hr, high resistance, 1KHz, 1~16Vp-p)
         flatness: ≤ ±0.5dB(≤100KHz), ≤±0.8dB(100KHz~1MHz), ≤±2dB(1MHz~2MHz), ≤ ±3dB(2MHz~3MHz), (less than 1Hz, the frequency amplitude is unstable)
         output impedance: 50Ω(±10%)          TTL level output characteristic: low level: <0.3V ; high level:>4.2V (high resistance)
4. DRIFT CHARACTERISTIC:
         drift range: 0V ~ ±6.4V (high resistance), 0V ~ ±3.2V (50Ω)
         resolution: 50mV (high resistance)
         drift error: ≤ ±(5%+100mV)(1hr, high resistance, 1KHz, 10Vp-p) 5. MODULATION CHARACTERISTIC:
         amplitude modulation: AM
         modulate waveform: (interior amplitude modulation) sine wave: 400Hz±10%, 1000Hz±10%
         2 ranges
         modulation depth: 1% ~ 100%
         modulation source: inner modulation source; outer modulation source
         outer modulation characteristic: input impedance: 600Ω
         input level: the modulation depth is 50% at 0dB          input frequency response: 100Hz~100KHz(~3dB)
6. SWEEP CHARACTERISTIC:
         Frequency sweep mode: linearity, logarithm
         During frequency sweep, the frequency and amplitude value will be displayed synchronistically, and can stop at any sweeping point. It will go on sweeping or restart after pausing.
         sweep rate: 0.02s ~5s/step; 5-digit can be set
         logarithm sweeping characteristic: 100 points per 10 times frequency ranges
7 .DISPLAYING:
         8-digit LED displaying with F,V, AM, SWEEP, MHz, KHz, Hz, %/s indicator and every range
8.POWER SOURCE: AC 220V/110V ±10%; frequency: 50Hz/60Hz±5%
9. AMBIENT TEMPERATURE AND HUMIDITY: 0 ~ 40°C , 3.0% ~ 70% RH
10. DIMENSION: 270mmx215mmx100mm
11. WEIGHT: 1.9 kg
 
* Specificatiile pot fi schimbate fara preaviz