Inapoi
» Date/Active » Convertoare de flux e1 la ethernet sau fibra optica » Networks application: e1, v.35, 10/100m ethernet, protocol interface converter
| Fiberscape - OP-E1-4ETHE1 to 4x10BaseT Protocol converterE1 to 4x10BaseT Protocol converter | Acest produs nu mai este disponibil! |
| E1 to 4x10BaseT protocol converter |
| |
| Features: |
• 4 switch 10M/100M Ethernet,Half/full duplex auto-negotiation, support VLAN.
• Connector RJ45, straight and cross auto-negotiation
• Provide 2 clock types: E1 master clock, E1 line clock.
• provide 3 loop functions: local loop, to remote loop, order remote loop.
• support 2 impedances: 75 Ohm unbalance and 120 Ohm balance.
• Have Ethernet monitor self-reset function, equipment will not dead.
• provide detecting realtime Ethernet communication status.
• support 1-4 Ethernet switch function.
• Network manager by SNMP. |
| |
| Specifications: |
This convertor provide conversion from ITU-T G.703 E1 channel to 4 Ethernet interface. used widely in connecting between WAN and LAN, monitoring,etc
• E1 Interface
interface standard: according with G.703
Interface Rate 2.048Mbps+-50ppm
Jitter tolerance according with G.742 and G.823.
transmission capability 4*E1
clock inter-clock, line-clock
connector BNC 75Ω/RJ45 120Ω
E1 Impedance 75Ω(unbalance), 120Ω(balance)
• 10/100 Base-T interface
Interface Rate: 10/100Mbps
full and half duplex auto-negotiation
Interface character match IEEE802.3, IEEE802.1Q(VLAN).
Connector RJ45, Auto fit for straight and cross
MAC address capability 4096
• Working Environment
power supply AC220VAC 110V / DC 48VDC +24V
power consumption ≤5W
working temperature: 0°C ~ 50°C
storage temperature: -40°C ~ +70°C
humidity: 95 % |
| |
|
| * Specificatiile pot fi schimbate fara preaviz |
