| Specifications |
Construction:
2. Conductor: bare copper wire, AWG 23/1
Insulation: PE
Twisting element: Pair
Twisting: 4 pairs separated by a cross element plastic foil (optional)
Outer sheat: halogen-free, flame retardant compound
Colour code: whbu/bu, whor/or, whgn/gn, whbn/bn
Colour outer sheat: yellow, RAL-1021
Fire behaviour:
Flame retardance: acc. to IEC 60332-1-2
Halogen acid gas emission: acc. to IEC 60754-1/2
Smoke density: acc. to IEC 61034-1/2
Calorific value (MJ/m): 0,65(aprox.)
Performance
better than category 6 acc. EN 50288 and IEC 61156
Bandwidth 300MHz
Applications:
Installation cable for generic cabling systems acc. ISO/IEC 11801 and EN 50173 (2. edition). Suitable for all applications of classes D up to E up to 1GbE acc. IEEE 802.3 ab, VoIP, PoE
Mechanical characteristics:
Bending radius:
during installation: 8 x overall diameter(min.)
after installation: 4 x overall (min.)
Tensile strength: 110(max.)
Crush (N/100mm): 1000
Impact (number of shocks): 10
Coupling attenuation up to 1000MHz(dB): 45 (nominal value)
Electrical characteristics at 20°:
DC resistance (Ohm/km): 75(max.)
Insulation resistance (Gohm x km): 5(min.)
Mutual capacitance (pF/m): 50 (approx.)
Transfer capacitance (e) (pF/km): 1500 (approx.)
Signal velocity (c): 0,67
Propaganda delay (ns/100m): 528 (approx.)
Skew at 100 MHz (ns/100m): 30 (approx.)
Characteristic impedance at 100MHz
(Ohm): 100±5
Test voltage Ueff(V): 1000
Operating voltage Ueff(V): 125(max.) |
|
